Waveform of IC and Basic Function




Thermal Products
Fan housing:
  • Material for size larger than 60x60x10mm is Thermoplastic UL 94V-0 PBT (30% Fiber)

  • Material for size equal or smaller than 60x60x10mm is Thermoplastic UL 94V-0 PBT (15% Fiber)

Fan blade:
  • Material is Thermoplastic UL 94V-0 PBT (15% Fiber)

Lead wire:
  • AWG # 28/30 for size equal or smaller than 40x40x8mm, 150mm length, material is UL approved
  • AWG # 26/28 for size between 40x40x10mm to 60x60x15mm, 300mm length, material is UL approved
  • AWG # 24/26 for size between 60x60x25mm to 120x120x38mm, 300mm length, material is UL approved

Insulation resistance:
  • Minimum 10M at 500VDC between housing and both lead wires

Dielectric strength:
  • Withstand 600VAC for one minute 1mA between housing and both lead wires

Operating temperature:
  • -10°C~+70°C, high/low temperature test for 24 hours, temperature change: 30°C/hour

Storage temperature:
  • -40°C~+70°C, high/low temperature test for 24 hours, temperature change: 30°C/hour

Basic locked rotor protection:
  • no coil & board damaged

Optional device:
  • Lock rotor protection with FG/RD signal output- Temperature sensor- Techometer output